 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Prosafe Trapped Key Interlock Switches Slamlock Electrical Specifications EN292-1&2, EN1088, IEC/EN60947-5-1, GS-ET-19, ISO12100-1&2, ISO14119, AS4024.1 Category Cat. 1 per EN 954-1 (ISO 13849-1) Suitable for Cat. 2, 3, or 4 systems Approvals BG, CE marked for all applicable directives, and C-Tick not required Safety Contact 2 N.C. positive break Utilization Category AC 15 AC (Ue) 500V 250V 100V (le) 1A 2A 5A DC 250V 0.5A, 24V 2A Max. Switched Current/ 500V/500V A Voltage/Load Thermal Current (lth) 10A Minimum Current 5V 5mA DC Safety Contact Gap >2 x 2mm (0.07in) Rtd. Insulation Voltage (Ui) 500V Rtd. Impulse Withstand Volt. (Uimp) 2500V Auxiliary Contacts 1 N.O. Pollution Degree 3 Actuator Travel-Pos. 5mm (0.19in) Opening Minimum Operating Radius 175mm (6.88in) (60mm (2.36in) with flexible actuator) Break Contact Min. Force 12N (2.7lbs) Max. Actuation Speed 1m/s Max. Actuation Frequency 2 cycle/s Case Material UL approved glass-filled polyester & 316L Stainless Steel Actuator Material Stainless steel Contact Protection IP67 Conduit Entry 3 x M20 Operating Temperature -20C to +80C (-4F to 176F) Humidity 95% RH Mounting SSS 4 x M5 Counterbored from Top or 4 x M5 from Underside with Nuts DSS 6 x M5 Counterbored from Top or 6 x M5 from Underside with Nuts Mechanical Life 100,000 Electrical Life 1,000,000 Weight (SSSE) 1160g (2.6lbs) (DSSE) 1700g (3.7lbs) Colour Red/Stainless Max. Holding Force 2000N (450lbs) Max. Releasable Load 100N (22.5lbs) Max. Shear Force for Keys 15.1KN (3398lbs) Max. Torque to Key 14Nm (124lb*in) Note: The safety contacts of the Guardmaster switches are described as normally closed (N/C), i.e. with the guard closed, actuator in place (where relevant) and the machine able to be started. Standards Single Dual Description The Prosafe Slamlock with electrical isolation combines the features of trapped key tongue actuated interlocks while also providing sets of electrical safety and auxiliary contacts. When the actuator is inserted into the lock and the key is removed the actuator is trapped in the unit thus locking closed the guard door. In this state the safety contacts are closed and the auxiliary contacts are open. To open the guard door the key must be inserted and rotated 90, opening the safety contacts, closing the auxiliary contacts and enabling the actuator to be released thus unlocking the guard door. While the guard door is open the key is trapped in the unit. Slamlocks with electrical isolation offer the features of electrical safety interlock switches with the benefits of a trapped key/enforced sequence systems. They allow a combination of both approaches for safeguarding machinery and processes to be used. The single key Slamlock (SSS) is used to interlock hatches, guards and doors where full body access is not required. The single key locks the actuator and operates the switch in the same action. Dual key Slamlock (DSS) is similar to the single key version but has a secondary key to allow `2 key in' or `key exchange' conditions. The key exchange version may be used where whole body access is required, as the secondary key can be used as a personnel key. Features * Electrical safety contacts combined with trapped key/enforced sequence feature * Most of unit constructed from 316L stainless steel * Selection of actuator types available * Single or dual key versions available * Direct drive operation * Replaceable code barrel assembly * Weatherproof stainless steel dust cap as standard The Prosafe Advantage Stainless steel construction. 5-26 Prosafe Trapped Key Interlock Switches Slamlock Electrical Product Selection Contacts Type Key Condition Key Trapped to Release Actuator Single Key Key Free to Release Actuator 2 N.C. + 1 N.O. Break Before Make Primary Key Trapped, Secondary Key Free to Release Actuator Dual Key Both Keys Free to Release Actuator Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection. Actuator Standard Flexible Flat Standard Flexible Flat Standard Flexible Flat Standard Flexible Flat Catalogue Number 440T -MSSSE10 440T -MSSSE11 440T -MSSSE12 440T -MSSSE20 440T -MSSSE22 440T -MSSSE23 440T -MDSSE10 440T -MDSSE11 440T -MDSSE12 440T -MDSSE20 440T -MDSSE22 440T -MDSSE23 5-27 Prosafe Trapped Key Interlock Switches Slamlock Electrical Approximate Dimensions--mm (inches) Dimensions are not intended to be used for installation purposes. Single Key Slamlock 3.5 (0.13) 38.3 (1.5) Safety Contacts Auxiliary Contacts 11 21 33 48 (1.88) 20.8 (0.81) 12 22 34 40 (1.57) 43.6 (1.71) 4 x M5 Top Entry 64.1 (2.52) Front Entry 34 (1.33) 5 (0.19) 20.8 (0.81) 5.5 (0.21) M20 4 (0.15) 3.5 (0.13) 93 (3.66) Bottom Entry Safety Contacts Auxiliary Contacts Double Key Slamlock 38.3 (1.5) 57.7 (2.27) 11 21 33 48 (1.88) 20.8 (0.81) 12 22 34 40 (1.57) 43.6 (1.71) Top Entry 64.1 (2.52) 6 x M5 240 (9.44) Key - Trapped Key - Free Front Entry 34 (1.33) 20.8 (0.81) 5.5 (0.21) 5 (0.19) M20 4 Actuator (0.15) Trapped Bottom Entry The Prosafe Advantage Stainless steel construction. 5-28 Prosafe Trapped Key Interlock Switches Slamlock Electrical Accessories Description Approximate Dimensions--mm (inches) M5 CSK 52 (2.04) 40 (1.57) 3.5 (0.13) Catalogue Number Replacement Standard Actuator 18 (0.7) 440G-A27011 4 (0.15) 36 (1.41) 14.5 (0.57) 57 (2.24) 25 (0.98) 36 (1.41) 18 (0.7) Replacement Flat Actuator 440K-A11112 3.5 (0.13) 31 (1.22) 40 (1.57) 52 (2.04) 18 (0.7) 2 Holes, 5.5 Thru Replacement Flexible Actuator 19 (0.74) 13 (0.51) 51 (2.0) 8 20 (0.78) 440G-A27143 2 Holes, 5.5 Slots 440T -AKEYE10 440T -ASCBE14 440T -ASFC10 Replacement Keys Replacement Code Barrel Replacement Dust Cap See page 5-33 See page 5-33 See page 5-33 Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection. Typical Applications Actuator out, key trapped, safety contacts open, auxiliary contact closed. Key Contacts Housing Actuator Locking force = 2000N (450lbs) 5-29 |
Price & Availability of 440T-MSSSE10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |